High-speed MODBUS

High-speed MODBUS with integrated servo motors MAC400, MAC800, MAC1500-3000 and the stepper controllers SMC75/85 and integrated stepper motors MIS23x/34x from JVL

JVL Industri Elektronik A/S, a world leader in integrated servo an stepper motors, now offers yet another feature: The latest firmware for the integrated servo motors MAC400, MAC800 and MAC1500-3000 and the integrated stepper motors MIS23x/MIS34x and the controllers SMC75/SMC85 now supports the MODBUS RTU protocol.

The implementation supports the Read Holding Registers and Write Multiple Registers commands, which will give R/W access to all motor registers at speeds up to 1 Mbit/s, though typically the PC standard rates of 9600..115200 and 230400 bits/s would be used.

The implementation uses the original V1.1 version of the MODBUS protocol for maximum compatibility. The firmware supports the commonly used two-wire RS-485 as well as both the four-wire RS-485 and RS422 standards. Both the inexpensive MAC00-Bx and the advanced MAC00-FSx expansion modules allow access to these options.

MODBUS is generally considered the most widely used serial communications protocol in the industry.

 

For more information about MULTIBUS, click here.

 

 For more information about MODBUS for:

- MAC050-141 click here.

- MAC400/800 and MAC1500-3000 click here

- SMC75/SMC85 and MIS23x/34x click here.

- MAC00-B4 click here.

 

For more information about MAC1500-3000 click here.

For more information about MAC400 click here.
For more information about SMC75 click here.

Siemens S7 MODBUS Master/Slave description click here.