Serial to Wireless Converter IEEE802.15.4 Data

The Serial to Wireless Converter RS232-ANT-IEEE802 is developed to meet the tough demands of industrial environments. It is a complete wireless serial cable replacement IEEE 802.15.4 device. With its IP65-classed housing it is built for tough and demanding environments. The device is equipped with the connectBlue Serial Port Adapter firmware which can be exchanged for a ZigBee application and/or customer developed applications.

IEEE 802.15.4 Support
+3 dBm (200 m)

IEEE 802.15.4 Chipset and CPU
Product based on ATMEL AT86RF230 radio chipset and ATMEL ATmega 1281 host CPU

Software
All software is included in the device, including the connectBlue Serial Port Adapter firmware for serial cable replacement.
ZigBee application layer and/or customer developed software can, by the customer, be embedded and executed in the device.
Configurable locally or over IEEE 802.15.4 using AT commands or configuration software.

Serial Interface
RS232/422
Supported baud rates: 300 bit/s - 57.6kbit/s
Support for non-standard baud rates
Flow control: CTS/RTS or none

Housing
IP65-classed rugged aluminum box
Mounting brackets

Connectors
Male 9-pin Dsub for serial interface
Binder 712 rugged plug for power supply

Power Supply
8-30 VDC

Current Consumption
Not connected, idle: 24 mA @ 9V
Transmitting (average): 29 mA @ 9V

Type Approval
R&TTE (Europe)
FCC/CFR 47 part 15 unlicensed modular transmitter approval
IC (Industrie Canada)

Environmental
Operating temperature without JST connector: -40 to +85°C
Storage temperature: -50 to +125°C
Humidity RH 5-90% non-condensing

Certifications and Compliance
R&TTE Directive 1999/5/EC
EN 300 328 V1.7.1 (2006-05)

EMC
EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-17 V1.2.1 (2002-08)
EN 61000-6-2 (2001)

Safety Compliance
EN 50371:2002
EN 60950-1:2001 and/or IEC 60950-1:2001 (1st Edition)
EN 60950-1/A11:2004 + Corrigendum:2004

Medical Electrical Equipment
IEC 60601-1-2 (2001) 

Getting started and mechanical dimensions