Serial to Wireless Converter BlueTooth Data

The Serial to Wireless Converter RS232-ANT-BLUETOOTH is a complete wireless serial cable replacement Bluetooth module. With its IP65-classed housing it is built for tough and demanding environments. It supports full Multipoint and Wireless Multidrop™ with up to 7 slaves.

Bluetooth Support
Bluetooth version 2.0 (Qualified and Listed as End Product)
Wireless Multidrop™ with up to 7 slaves

Supported Bluetooth Profiles:
Generic Access Profile (GAP)
Serial Port Profile (SPP)
Dial-up networking Profile (DUN GW, DUN DT)
Class I +20 dBm (>300 m)

Bluetooth Chipset and Stack
Product based on Philips well known BGB204 chipset and Philips Host Stack

Software
All software is included in the module.
Configurable locally or over Bluetooth using AT Commands or PC Wizard
ECI protocol
ECI Toolbox available

Serial Interface
RS232/422/485
Supported baud rates: 300 - 921.6k
Support for non-standard baud rates
Flow control: CTS/RTS or none

Housing
IP65-classed rugged aluminum box
Mounting brackets

Connectors
Male 9-pin Dsub for serial interface
Binder 712 rugged plug for power supply

Current Consumption
Min:10 mA @9VDC
Max: 50 mA @9VDC

Dimension/Size
75.5 x 84.6 x 34.6 mm

Type Approval
R&TTE (Europe)
FCC/CFR 47 part 15 unlicensed modular transmitter approval
IC (Industrie Canada)

Environmental
Maximum operating temperature: -30 to +85 °C
Storage temperature: -40 to +85°C
Humidity RH 5-90% non-condensing
Shock and vibration: IEC 61131-2

Certifications and Compliance
R&TTE Directive 1999/5/EC
EN 300 328 V1.6.1 (2004-11)

EMC
EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-17 V1.2.1 (2002-08)
EN 61000-6-2 (2001)

Safety Compliance
EN 60950-1:2001 and/or IEC 60950-1:2001 (1st Edition)
EN 60950-1/A11:2004 + Corrigendum:2004

Medical Electrical Equipment
IEC 60601-1-2 (2001)

Getting started and mechanical dimensions