FAQ
What are Reg. 35 bit 18,19 and 20 used for ? ( MAC800 )
|
What are Reg. 35 bit 18, 19 and 20 used for ?
|
From version 1.18 The upper bits in Reg. 35 ( ERR_STAT ) have now been applied to this register and is:
- Bit 18: Not used.
- Bit 19: VAC_ON. This bit indicates that 230 VAC inlet is
switched on.
You may try to switch power on / off and watch the status of bit 19.
The bit is used internally in agreement with the
undervoltage setup.
- Bit 20: PWM_LOCKED. This bit indicates that a severe error has
occurred, and that any activity on the outlet to the motor
windings has been stopped to protect the drive. This bit
can only be reset by switching 24 VDC power off / on.
|
JVL A/S Bregnerødvej 127 DK-3460 Birkerød Denmark
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
Tel: +45 4582 4440 Fax: +45 4582 5550 E-mail: jvl@jvl.dk
